New Replacement Standard Duty 45hp Post Hole Digger Gearbox free shipping

Description

Georgia Equipment Company
Hours 7:30 to 5:00 EST M-F till noon on Saturday
Up for sale is (1)
REPLACEMENT POST HOLE DIGGER GEARBOX
.  This gearbox fits different brand hole diggers and can be made to fit others.  The specs are listed below.
** INPUT SHAFT IS 1-1/4" DIAMETER AND 2-1/16" LONG
**TAKES 3/8" SHEAR BOLT AND HAS THE GROOVE FOR SAFETY RING IN CASE THE SHEAR BOLT BREAKS
**OUTPUT SHAFT IS 2" (51MM) AND 4-5/16" LONG
**MOUNTING PIN IS 7/8" DIAMETER AND 6-1/4" LONG
**BETWEEN THE TWO MOUNTING EARS IS 4-3/16" AND 5-5/8" OUTSIDE TO OUTSIDE
**GEAR RATIO IS 2:29:1
**SHIPS UPS GROUND
**THIS IS A STANDARD DUTY GEARBOX
No shipping to Alaska, Hawaii, and Puerto Rico
*Our part number PHPD26HD
*This gearbox is rated up to 45hp, the other one we sell is rated up to a 75 hp. You can run either gearbox with a 20hp tractor, the hp rating is just what not to exceed
.
We carry all replacement parts for this gearbox as well as posthole diggers pto shafts and augers.  We also carry lots more agricultural parts just check out our ebay store.
*The
GEARBOX IS SHIPPED WITHOUT OIL
for shipping purposes.  It takes 80-90 gear oil.  Look at the pictures and the one of the back of the gearbox, you will see a plug on the top and a small little pipe plug on the bottom right side.  The top hole is where you put the oil in, you take out the pipe plug and as you pour the oil in and when it starts running out of the pipe plug hole then it is full.  You only fill the box roughly half way, if you overfill the breather plug will release some of the pressure but you also run the risk of blowing out one of your oil seals so try to maintain adequate oil levels. Of course you do this with the box mounted and in an upright position.
GOD BLESS!!!
Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser.